Filter
Top Products
37
System Maintenance
This page let you backup / Restore all of your configuration parameters on the VoIP router. It is very
good idea to back up all of your VoIP router configuration parameters after install.
Configurations
To Backup, press Download setting backup file, and input the file name you want and file location to
save.
To Restore, press the Browse button the select the backup configuration parameters file to upload then
press Restore . After you upload the file, Press “Saved modification” to save your current
configuration to Flash ROM (Usually used to save currently WAN configuration).After save, please
remember to “Reboot” the VoIP router to let the restored parameters take effective.
Never power off the VoIP router when during Restore
configure or upgrade VoIP module or System, it will cause
permanent damage when power off during writing Flash inside
VoIP router.
L Hint
Reboot System
Use the Reboot button on this page to reboot your VoIP router, before you reboot, please make sure
you have to press the “Saved modification” to save your current configuration to Flash ROM,
otherwise all the change will be disappear after reboot.
Save Modification to Flash Memory
Most of the VoIP router parameters will take effective after you modify, but it is just temporary stored on
RAM only, it will disappear after your reboot or power off the VoIP router, to save the parameters into
Flash ROM and let it take effective forever, please remember to press the Save Modification button
after you modify the parameters.