Filter
Top Products
10
LED Display & Button
1 PC
RJ-45 connector, to maintain the existing network structure,
connected directly to the PC through straight CAT-5 cable
2 LAN
RJ-45 connector, for Internet access, connected directly to
Switch/Hub through straight CAT-5 cable.
The LAN interface also can be connected with 802.3af PoE
switch or converter for power supply (VIP-156PE)
3 12V DC
12V DC Power input outlet
4 Reset
Reset to the factory default setting
5 LINE
PSTN relay when machine power lost (VIP-158)
Machine default IP is http://192.168.0.1. Press RESET
button on rear panel over 5 seconds will reset the VoIP Phone
A
dapter to factory default value. (Except speed dial and
call forward settings)
ÍNote
LED Indicators Descriptions
PWR
Power is supplied to the gateway.
STATUS
The Status LED will be flashing when the machine is operational
LNK/ACT
OFF: the gateway is connected to LAN at 10Mb/s.
ON: the gateway is connected to LAN at 100Mb/s.
RING
OFF: the phone is idle.
ON: the phone is in use (offhook).
Blinking: the phone is ringing.