Planet Technology VIP-156PE Network Card User Manual


 
telephone set and refer to the following table for machine network configurations.
IVR Menu Choice Machine operation Parameter(s) Notes:
#111#
Set DHCP client None
VIP-156 will change to
DHCP Client
#112xxx*xxx*xxx*
xxx#
Setup Static IP Address
Use the * (star) key
when entering a decimal
point.
DHCP will be disabled and
system will change to the
Static IP type.
#113xxx*xxx*xxx*
xxx#
Set Network Mask
Use the * (star) key
when entering a decimal
point.
Must set Static IP first.
#114xxx*xxx*xxx*
xxx#
Set Gateway IP Address
Use the * (star) key
when entering a decimal
point.
Must set Static IP first.
#115xxx*xxx*xxx*
xxx#
Set Primary DNS Server
Use the * (star) key
when entering a decimal
point.
Must set Static IP first.
Following keypad commands can be used to display the network settings enabled on VIP-156 via voice
prompt.
IVR Menu Choice Machine operation Notes:
#120#
Check IP Address
IVR will announce the current IP address of
the VIP-156
#121#
Check network connection Type
IVR will announce if DHCP in enabled or
disabled.
#122#
Check the Phone Number
IVR will announce current enabled VoIP
number
#123#
Check Network Mask
IVR will announce the current network mask
of the VIP-156.
#124#
Check Gateway IP Address
IVR will announce the current gateway IP
address of the VIP-156.
#125#
Check Primary DNS Server Setting
IVR will announce the current setting in the
Primary DNS field.
#128#
Check Firmware Version
IVR will announce the version of the
firmware running on the VIP-156.
Afte
r
Please contact your Internet service provider to obtain the
Internet access type, and select the proper network settings
in VIP-156 to establish the network connections.
L Hint
13