Filter
Top Products
Get to know the Wireless VPN Firewall Router
Back Panel
The diagram (fig1.0) below shows the VRT-401G’s back panel. The router’s back panel is divided
into three sections, LAN, WAN and Reset:
Figure 1.0
1) Local Area Network (LAN)
The VRT-401G’s 4 LAN ports are where you connect your LAN’s PCs, printer servers, hubs
and switches etc.
2) Wide Area Network (WAN)
The WAN port is the segment connected to your xDSL or Cable modem and is linked to the
Internet.
3) Reset
The Reset button allows you to do one of two things.
1) If problems occur with your router, press the router’s reset button with a pencil tip (for
less than 4 seconds) and the router will re-boot itself, keeping your original
configurations.
2) If problems persist or you experience extreme problems or you forgot your password,
press the reset button for longer than 4 seconds and the router will reset itself to the
factory default settings (warning: your original configurations will be replaced with
the factory default settings)
Front Panel
On the router’s front panel there are LED lights that inform you of the router’s current status.
Below is an explanation of each LED and its description.
Figure 1.1
LED Light Status Description
PWR ON Router’s power supply is on
WAN 10/100M ON WAN port 100Mbps is connected
OFF WAN port 10Mbps is connected
WAN LNK/ACT ON WAN is connected
OFF No WAN connection
Flashing WAN port has Activity (ACT), data being sent
6