Filter
Top Products
users to define the traffic type permitted in your LAN. You can control which PC client can have
access to these services.
Parameters Description
Deny If select “Deny” then all PCs will be allowed to access
Internet accept for the PCs in the list below.
Allow If select “Allow” then all PCs will be denied to access
Internet accept for the PCs in the list below.
Filter client PC by MAC address Check “Enable MAC Filtering” to enable MAC Filtering.
Add PC Fill in “Client PC MAC Address” and “Comment” of the
PC that is allowed to access the Internet, and then click
“Add”. If you find any typo before adding it and want to
retype again, just click "Reset" and the fields will be
cleared.
Remove PC If you want to remove some PC from the "MAC Filtering
Table", select the PC you want to remove in the table
and then click "Delete Selected". If you want remove all
PCs from the table, just click "Delete All" button. If you
want to clear the selection and re-select again, just click
“Reset”.
Filter client PCs by IP Fill “IP Filtering Table” to filter PC clients by IP.
Add PC You can click Add PC to add an access control rule for
users by IP addresses.
Remove PC If you want to remove some PC from the "IP Filtering
Table", select the PC you want to remove in the table
61