Filter
Top Products
Web-based configuration
1.3 LED Indicators
LED Color Function
PWR Green Off: Power is not connected
On: Device is ready
Blink: During boot up procedure
WLAN Orange Off: Wireless LAN is no function
Blink: Transmitting or receiving data through the Wireless LAN
10/100M Green Off: LAN is connected to 10Mbps device
On: LAN is connected to 100Mbps device
LNK/ACT Green Off: LAN is not connected
On: LAN is connected
Blink: Transmitting or receiving data through the LAN
1.4 Wireless Performance
The following information will help you utilizing the wireless performance and operating coverage of
WAP-4035.
1. Site selection
To avoid interferences, please locate WAP-4035 and wireless client away from transformers,
microwave ovens, heavy-duty motors, fluorescent lights and other industrial equipments. Keep the
number of walls or ceilings between AP and clients as few as possible. Otherwise the signal strength
may be seriously reduced. Place WAP-4035 in an open space or add additional WAP-4035 as
needed to improve the coverage.
2. Environmental factors
The wireless network is easily affected by many environment factors. Every environment is unique
with different obstacles, construction materials, weather, etc. It is hard to determine the exact
operation rage of WAP-4035 in a specific location without testing.
3. Antenna adjustment
The bundle antenna of WAP-4035 is adjustable. Firstly install the antenna pointing straight up, then
smoothly adjust it if the radio signal strength is poor. But the signal reception is definitely weak in
some certain areas, such as location right down the antenna.
Moreover, the original antenna of WAP-4035 can be replaced with other external antennas to extend
8