Filter
Top Products
show security mac-learning Show port security status
show security static-MAC Show static mac table information
show snmp Show snmp information
show snmp rmon Show snmp rmon state
show spantree Show spanning tree information
show syntax Show basic help infomation
show system Show system information
show trunk Show trunk information
show version Get last software version
show vlan Show vlan information
show vlan type Show current vlan type
3.5.2 Privileged Command
To access to the second level, enter the “enable” command in the first level. The sysem then prompt for
a password. Please enter “password” for the password.
The promt then changes to “Switch\enable>”. Entering a question mark "?" at the prompt displays the
list of commands available for command mode.
3.5.2.1 Clear command
Clear command is to clear the parameter. The follow table lists the clear commands and the equivalent
usages.
Command Description
clear channel Clear member from channel
clear mirror monitored-port egress Clear egress monitored port for mirror
clear mirror monitored-port ingress Clear ingress monitored port for mirror
clear multicast router Clear router port
clear port counters Clear port statistics counter
clear port rate-shaping Clear rate-shaping of all ports
clear port spantree portcost Restore spanning tree port cost to default value
clear port spantree portpri Restore spanning tree port priority to default value
clear port storm-limit Clear strom limit of all ports
clear qos map cos-queue-map Reset cos-queue map to default
clear qos map dot1p-cos-map Reset dot1p_cos map to default
clear qos map mac-cos-map Clear qos map mac-cos-map
clear qos map vlan-cos-map Clear qos map vlan-cos-map
clear security filter-MAC Clear MAC filter entry