Filter
Top Products
Appendix B Plasmon AA Express User Manual
Page 30 Document Revision B
Power Cord Set Selection
The voltage rating and the current rating of the power cord set shall be higher than the rated voltage
and current of this unit. The voltage of the power cord set shall be higher than the power source.
For the U.S. and Canada
Power cord must be UL listed and CSA labeled. Type SJT, SVT, ST, SJO or SO, 3-conductors, No. 18
AWG, rated 125v, 10A.
In the US the 120 VAC power cord shipped with Plasmon libraries meets these criteria:
• The power cord must have a molded NEMA 5-15P male attachment plug on one end.
• The power cord must have a molded IEC type CEE-22 female connector on the other end.
• The power cord must be UL Listed and CSA Certified.
Outside the US contact Plasmon for country specific requirements.
For Germany and continental Europe
STROMANFNAHME: 100-240 VAC, 50/60 Hz, 10A.
Für eine 230V-Anwendung, ist eine harmonisierte <HAR> konfektionierte Leitungsschnur, Typ
H05vvf3G1.00, die für 250V/10A oder die Gleichwertigkeit geeognet ist, zu benutzen.
Power Supply
The AAE power supply is certified for China Compulsory Product Certification (CCC).