PLUS Vision U5-732 Projector User Manual


 
E-13
Remote Control Range
Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit
and operate.
Reception of the remote control signal should generally be possible within the range illustrated below.
Precautions
Handling of the Remote Control
* Exposure of the main unit's remote control sensor or the remote control infrared transmitter to bright light or the
obstruction of the signal by an obstacle located in the pathway may prevent operation.
* Do not drop the remote control or handle it inappropriately.
* Do not expose the remote control to water or other liquids. Should the remote control become wet, wipe it dry
immediately.
* Try to avoid use in hot and/or humid locations.
* Please keep button batteries out of the reach of children. If a battery is swallowed, promptly obtain the medical care
of a doctor.
* Remove the batteries from the remote control when it is not going to be used for a long period.
* Some operations (such as menu operations) are available only through the use of the remote control and attention
should be given to its careful handling.
Names of the Remote Control Parts/Preparing the Remote Control
STANDBY
STATUS
STANDBY
AUTO
SOURCE
5m/16.4feet
5m/16.4feet
3m/9.8feet
6m/19.7feet
20°
20°
30°
30°
5° 5°
Side View
Remote control
infrared transmitter
Remote control
sensor
Top View
Remote control
sensor
Remote control
infrared transmitter