Filter
Top Products
E-58
1
2
3
Replacing the Lamp Cartridge
Preparations: Turning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched makes it easier to
replace the lamp cartridge. Turn the projector right-side up after replacing the lamp cartridge.
1
Unplug the power cord.
2
Turn the projector upside-down.
3
Remove the lamp cover.
(1)Turn the lamp cover’s set screw counterclockwise and
loosen until the screw turns freely. (The screw does not
come off.)
4
Remove the lamp cartridge.
(1)Fully loosen the lamp cartridge’s two screws. (The screws
do not come off.)
(2)Grasp the lamp cartridge’s handle and pull upward to re-
move the lamp cartridge.
(2)Open the lamp cover a little, then pull it in the direction of
the arrow and remove it.