PLUS Vision U4-112/U4-111 Projector User Manual


 
E-38
Menu Operation Method
Performing Menu Operations
When a signal is not being input, only [Setup] and [Info.] can be selected.
The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds.
The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected
from the power outlet.
(Note that some items are not stored.)
Preparation Switch on the power of the connected equipment, start the play operation or another operation, and input
the signal to the projector.
Select the input that you wish to adjust.
The menu display of the description diagram depicts an example in which the Keystone item name is selected.
1
Press the MENU button to display the menu
Menu Display
The menu name that existed when the menu was closed previously will be displayed.
Note
Please check that the cursor of the item name has disappeared at the time of menu name selection.
Press the CANCEL button to make the cursor disappear.
MENU
ENTER
CANCEL
TIMER
KSTN
Image Color View Setup Info.
Contrast
0
Picture Adj.
0
Fine Picture
48
H Position
0
V Position
0
Reset
Brightness
0
2
Press the SELECT ̇̈ button to select the menu name
Selection of the Menu Name
Each press of the SELECT ̈ button advances the selection one step in the sequence of Color View Setup
Info. Image. Each press of the SELECT ̇ button causes a return of one step.
The selected menu name will appear in red.
ENTER
CANCEL
TIMER
KSTN
MENU
Filter
Vertical Flip
Horizontal Flip
Keystone
0
3
Keystone Save
Image Color View Setup Info.
Aspect Auto
Off
Off
On