PLUS Vision U5-632 Projector User Manual


 
E-11
FREEZE
MUTE
LASER
AUTO
TIMER
VOL
ZOOM
RGB
VIDEO
R-CLICK/
CANCEL
QUICKMENU
ENTER
STANDBY
Q
12
34
Names of the Remote Control Parts/Preparing the Remote Control
VOL button [E-31]
(Volume adjustment)
STANDBY button [E-23, 25]
This button is used to switch ON
the power aand set the unit to the
STANDBY mode.
AUTO button [E-28]
(Automatic adjustment of the RGB
moving image)
Buttons used for menu operations
[E-40]
The , , and buttons are
the select (̆, ̄, ̇ and ̈) buttons.
There are two types of remote control units included with the U5 series of projectors. Both types are described below.
Refer to the description (and diagram) for the remote control unit included with your projector.
FREEZE button [E-30]
(Freezes moving pictures)
MUTE button [E-30]
(Temporarily cancels the video and
audio)
TIMER button [E-33]
(Presentation timer time setting
display)
ZOOM button [E-32]
(Digital zoom adjustment)
Buttons used for input selection
[E-28]
RGB button and VIDEO button
(VIDEO / S-VIDEO)
LASER button [E-34]
(Turns the laser point on and off)
QUICK button [E-39]
(Displays a simplified menu)
Buttons used for the PC mouse
function [E-35]
(JOG button and R-CLICK button)
Number buttons [E-37]
(Used for the security lock.)
Inserting the Batteries
When using the remote control for the first time, install the batteries that were supplied.
(B)
(C)
(A)
2
Insert the batteries to match
the "+" and "" as indicated in-
side the compartment.
1
Slide the battery compartment
cover (located on the bottom
of the remote control) and pull
off.
3
(A) Leaving a little space in the front, close
the lid, (B) then with the back pressed tightly,
(C) press the lid towards the front.
Names of the Remote Control Parts
Infrared transmitter [E-13]
Laser transmitter [E-34]
L-CLICK button [E-35]
Note:
If a button on the remote control unit is held in con-
tinuously for approximately 30 seconds, signal
transfer will be suspended. To resume transferring
signals, press the button again.
Also, to use the jog button after signal transfer has
been suspended, first press any other button, then
press the jog button.
CAUTION
When replacing batteries, purchase two of the same type of AAA battery.
Heed the regulations in effect in your region on the disposal of spent batteries.
Names of Parts/Preparing the Remote Control Unit
Included with the U5-632
Applicable Projector: U5-632