PLUS Vision U5-632 Projector User Manual


 
E-37
General Operation
Protecting the Projector with the Security Lock
A password can be registered and the security lock set in order to protect the projector from unauthorized use.
Registering the password
The password is registered using the menus. For instructions on operating the menus, see Menu Operations on E-40.
(1) Select Security Lock in the Option menu and set it to Enable.
The menu closes and the password registration display appears.
RGB
STANDBY
VIDEO
ASPECT
TIMER
VOL KSTN ZOOM
QUICK
MENU
ENTER
Q
FREEZE
MUTE
ECO AUTO
CANCEL
1234
FREEZE
MUTE
LASER
AUTO
TIMER
RGB
VIDEO
QUICKMENU
ENTER
STANDBY
Q
VOL
ZOOM
R-CLICK/
CANCEL
12
34
This completes password registration.
The Password input display appears the next time the power is turned
on.
(2) Use the number buttons (1 to 4) to register the password.
Be sure to input a 4-digit number.
Example: Registering the password 2441
(1) Press number button 2. An
*
(asterisk) appears at the first place.
Next press number buttons 4, 4 and 1 in that order. Asterisks appear
in all four places.
(2) Input the password again. An
*
appears when the input number
matches. If there is a mistake, the asterisks turn off. Start over from step
(1) above.
If the password matches, the password registration display closes.
Note:
To cancel the number you have input, press the CANCEL button.
The asterisks disappear and the display returns to the input standby mode at the first
place.
To cancel the password registration mode, press the CANCEL button again. The “Pass-
word” display turns off.
Note:
The numbers you have input are not displayed. Be sure to write down the password
and store it in a safe place.