PLUS Vision U5-512 Projector User Manual


 
E-54
Setup
Select menu name Setup.
See Menu Operation Method on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See List of Item Names Offering Input Selection and Adjustments/Settings on Page E-45.
Auto Power Off
This function switches off the projector power automatically when the
input of the projector enters a no-signal condition.
Select item name Auto Power Off and select the setting contents with the
SELECT (̇̈) buttons.
On............... The power is switched off when there is no signal.
Off .............. The power is not switch off even when there is no signal.
Operation when Function is On
The No Signal Power Off display appears when a no-signal condition con-
tinues for approximately 10 seconds. The power is switched off about 5
minutes after this.
If a signal is input during the appearance of the display and an operation
button other than the STANDBY button is pressed, the display is closed and
the function is cancelled.
Note:
Some video decks and other equipment output a blue background or other video when playback ends. When this happens, a signal is being
input to the projector and Auto Power Off is not activated.
Auto Source
The Auto Source function automatically detects the input signal when
the power supply is switched on and when the input is switched.
Select the item name Auto Source and select the setting contents with the
SELECT (̇̈) buttons.
On............... Switches on the automatic detection function
Off .............. Switches off the automatic detection function
Signal Detection Order When On
The sequence of RGB VIDEO S-VIDEO is searched repeatedly.
When a signal is detected, the search is stopped and the image is projected.
Color B/W Switching
Applicable Projector: U5-632
Documents, spreadsheets or other mostly black and white data can be
projected with stronger brightness.
It is possible to switch between the black/white and color mode while an
image is being projected.
Select the Color B/W Switching item name, then use the ̇ and ̈ SELECT
buttons to select the desired setting.
Color........... The color image projection mode is set.
B/W ............ The high brightness black/white image projection mode is set.