Filter
Top Products
5. ESTABLISHING IRDA CONNECTION WITH ANOTHER
INFRARED DEVICE
After confirming the detection of USB 1.1 IrDA Adapter, place your Polar infrared device and its IR
window within one meter (39 inches) range from the infrared window at the end of the Adapter. The
Polar device will be detected if it is within a 30 degree angle from the infrared window of the Adapter.
Leave a minimum of 1 cm (0.4 inches) space between the devices.
An icon and a popup message will appear in the Toolbar indicating the Adapter is recognizing another
infrared device within its range:
While the two devices are connected and data transfer is in progress, you will see the Data Transfer
icon in your Toolbar. Moving the cursor onto this icon will display the connection speed of IrDA link.
However, if you see an Infrared Connection icon as pictured below, the two devices are connected but
no data is being transferred:
As Infrared Connetion icon appears on Toolbar, the Wireless Link icon appears on your desktop:
6. REMOVE POLAR IRDA 1.1 USB ADAPTER FROM THE
Polar IrDA USB 1.1 Adapter and Bridge Driver User manual 11