Polycom 1725-36033-001 Server User Manual


 
SpectraLink 8000 SVP Server: Administration Guide for SIP
PN: 1725-36033-001_C.doc
24
SendAll
In an IP system with multiple SVP Servers, the SendAll option is
provided to speed configuration and to ensure identical settings. The
S=SendAll option allows you to send that configuration parameter to
every SVP Server on the LAN.
SendAll can only be used after the IP
address is established on EACH SVP Server via the serial connection.
If you anticipate identical settings across the LAN, set just the IP
address and custom hostname (if desired) for each SVP Server using
the initial serial connection. Then connect via the LAN and use
SendAll
to set identical configuration options for all SVP Servers.
If
SendAll is to be utilized in your system, all passwords must be
identical. DO NOT CHANGE THE PASSWORD AT THE INITIAL
CONFIGURATION IF THE
SendAll OPTION IS DESIRED. Use the
default password and change it globally if desired after a LAN
connection is established for all SVP Servers.
If independent administration of each SVP Server is desired, the
passwords may be set at initial configuration.
The following options must be configured:
IP Address
Enter the IP address of the SVP Server, defined by your network
administrator. Enter the complete address including digits and
periods.
DHCP may be entered.
The SVP Server will automatically lock for maintenance if the IP
address is changed. When this
Maintenance Lock occurs, the SVP Server
must be reset upon exit. All active calls are terminated during a reset.
Hostname
(Optional) change the default host name, if desired. This is the name
of the SVP Server to which you are connected, for identification
purposes only. You cannot enter spaces in this field.
The host names for each SVP Server and OAI Gateway on the
system must be unique.