Filter
Top Products
Nortel: WLAN Security Switch 2300 Series with AP-2330
PN: 1725-36082-001_G.doc
15
4. In the IP Address field, type the IP address for the WLAN Security
Switch.
5. In the
Enable Password field, type the enable password for the
WLAN Security Switch.
The enable password must match the enable password that was
defined in the Quick Start Wizard. For more information, see the
Nortel WLAN Security Switch 2300 Series Configuration Guide.
6. Click the
Next button. The uploading progress is shown.
7. After the
Successfully uploaded device message is displayed, click the
Next button.
AP configuration
To add a directly connected or distributed AP to a WLAN Security
Switch using WMS:
1. Connect the AP to the network (distributed AP) or a free PoE port
on the switch (directly connected AP).
2. In WMS click
Configuration on the tool bar.
3. In the
Organizer panel, expand the WSS and select Access Points.
4. In the
Network Plan Tasks panel, create a new AP by selecting
Distributed AP or Directly Connected AP.