Filter
Top Products
Nortel: WLAN Security Switch 2300 Series with AP-2330
PN: 1725-36082-001_G.doc
3
Introduction
Polycom’s Voice Interoperability for Enterprise Wireless (VIEW)
Certification Program is designed to ensure interoperability and high
performance between SpectraLink Wireless Telephones and wireless
LAN (WLAN) infrastructure products.
The products listed below have been thoroughly tested in Polycom’s
lab and have passed VIEW Certification. This document details how
to configure the Nortel WLAN Security Switch 2300 Series and
WLAN AP-2330/2330A/2330B with SpectraLink Wireless
Telephones.
Certified Product Summary
Manufacturer: Nortel: www.nortel.com
WLAN Security Switches Access points Approved products:
2380
2361
†
2360
2350
2330
†
2330A
2330B
Security: WPA-PSK and WPA2-PSK
2300 software version certified: Release 5.0.11.4
SpectraLink handset models certified: ** e340/h340/i640 8020/8030
SpectraLink handset software certified: 89.119 122.010 or greater
SpectraLink radio mode: 802.11b 802.11b 802.11a
Maximum telephone calls per AP: 10 10 12 *
Recommended network topology: Switched Ethernet (required)
†
Denotes products directly used in Certification testing.
* Maximum calls tested during VIEW Certification. The certified product may actually support a higher
number of maximum calls for 802.11a radio modes.
** SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified
with the WLAN hardware and software identified in the table. Throughout the remainder of this
document they will be referred to collectively as “SpectraLink Wireless Telephones”.
Service Information
The access point (AP) must support SpectraLink Voice Priority
(SVP). Contact your AP vendor if you need to upgrade the AP
software.