Polycom 3725-32871-002/A Server User Manual


 
Polycom® RSS
4000 Getting Started Guide – Version 6.0
4
2 Set your computer IP address to be in the same network segment as the Polycom®
RSS™ 4000.
3 Run the Web browser on your computer, enter https://<system IP address> in the
address bar, and then press Enter.
By default, Polycom® RSS™ 4000 Web server has an untrusted certificate and uses the
HTTPS protocol to set up SSL secure connection with client end.
If you use Internet Explorer as a browser, you will be prompted that the security
certificate for the website has some problem. Please choose Continue to this website to
enter the Login page.
If you use Firefox browser, you will be prompted that the connection is not trusted.
Please add the site being connected to Security Exception as suggested on the page
and enter the Login page.
After you install the security certificate issued by the Certification Authority in your system,
you will not receive this alert again.
4 (Optional) Select a language for the Web interface from the Select language list in
the top right of the page.
5 On the Login page, enter the administrator’s username and password, and then
click the Log In button.
The default username and password are both admin.
6 The Product Activation page displays when you first-time log in. Enter the
activation key in the Activation Key box and click Update.
If you do not activate the system, you can still use the Web interface, but cannot perform
calling, recording, live streaming and video playing operations using the system.
7 When prompted to restart the system, select No to proceed with setting the IP
address.
8 Click System Config>IP Setting to enter the IP Setting page. Set the following
parameters:
Parameter Description
Obtain an IP Address
Automatically (DHCP)
If the user network is configured with a Dynamic Host Configuration
Protocol (DHCP) server, select this option to automatically obtain the
IP address.
Note:
This option is not recommended as the address assigned by