Filter
Top Products
Aruba Mobility Controllers: A200, A800, A2400, A6000
PN: 1725-36080-001_J.doc
1
7
CLI command configuration
All of the commands listed in the CLI Commands column above must
be entered under the
ap location command.
The format is:
ap location x.y.z
phy-type g (To make the changes for the “g” radio.)
commands
!
phy-type a (To make the changes for the “a” radio.)
commands
!
Web-based configuration
1. Click the Configuration button.
2. In the navigation pane, select
Radio from the WLAN sub-menu.
3. Click the
802.11b/g tab.
4. For
Max Retries, enter 2 for voice.
5. Select the
Short Preamble check box.
6. For the
DTIM period, enter 3.
7. For
Basic Rates and Supported Rates, consult the facility’s RF site
survey to determine if coverage is sufficient to support all data
rates.
8. To assign the power and channel setting manually:
a. For
ARM Assignment, select Disabled.
b. Clear the
ARM Scanning check box.
c. Set the
Default Channel and Initial Transmit Power from their drop-
down lists.
d. For
Mode, click the Access-point option.
9. Click the
Apply button.