Polycom XS-3900 Network Router User Manual


 
Xirrus Wi-Fi Array: XS-3500/3700/3900
PN: 1725-36061-001_C.doc
11
Setting Radio Cell Size
The radio transmit powers and receive sensitivities should be set
appropriately for the environment in which they are operating. The
simplest way to do this is to pick an operating cell size for them. The
following CLI commands illustrate how to set a small cell size on
three of the abg radios.
Please see the Xirrus Wi-Fi Array Users Guide for a detailed
explanation of radio transmit power, receive sensitivities and cell
sizing.
Xirrus_WLAN_Array(config)# interface iap
Xirrus_WLAN_Array(config-iap)# abg1 cellsize small
Xirrus_WLAN_Array(config-iap)# abg3 cellsize small
Xirrus_WLAN_Array(config-iap)# abg4 cellsize small
Xirrus_WLAN_Array(config-iap)# abg1 up
Xirrus_WLAN_Array(config-iap)# show
IAP Summary Table
Cell TX RX
IAP State Channel Antenna Size Power Threshold Stations WDS MAC address / BSSID
--------- ------- -------- ---------------------- -------- --- -----------------
a1 down 36 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:63:11
a2 down 52 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:63:31
a3 down 149 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:63:41
a4 down 40 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:63:51
a5 down 56 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:63:71
a6 down 157 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:62:81
a7 down 44 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:62:91
a8 down 60 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:62:b1
a9 down 153 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:62:c1
a10 down 48 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:62:d1
a11 down 64 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:62:f1
a12 down 161 int-dir manual 8dBm -75dBm 0 00:0f:7d:03:63:01
abg1 up 11 int-dir small 5dBm -75dBm 1 00:0f:7d:03:63:21
abg2 down monitor int-omni manual 20dBm -95dBm 0 00:0f:7d:03:63:61
abg3 down 1 int-dir small 5dBm -75dBm 0 00:0f:7d:03:62:a1
abg4 down 6 int-dir small 5dBm -75dBm 0 00:0f:7d:03:62:e1