Filter
Top Products
Part 11
WB
-
6300
WB
-
6600
WB
-
6800
WB
-
6000
as in left picture. Put the battery in at the other end first and remount the
bracket with its tongue matching under a bridge in the wall of base box from
the right as arrowed in above left picture then apply the fixing screw. Please
pay particular attention to the environment requirements for UPS battery in
next chapter “USING THE TOUCH POS”.
WALL MOUNTING
Select a flat surface on wall of adequate strength and with proper
ventilation and space condition. Please use the right material to hold this
terminal according to the wall material (Drywall, concrete, solid wood, etc).
Consult with your contractor if it is necessary. A fully equipped system may
weigh up to 11 kg or 23 lbs. Please follow the installation guide delivered with
WB-6000 for its installation.
For WB-6300, WB-6600 and
WB-6800 please separate the back
cover of the wall mount bracket kit and
fix it to wall at the 3 or 4 arrowed holes
as appropriate according to these
pictures on both sides per type of back
covers with proper materials and proper
preparations. Install required optional
device kits with their mechanical
fixation parts in the wall mount bracket
and hang the backpack to the back
cover that is already fixed on wall with
the cables coming out of the brackets
through the openings marked with
rectangles in the above pictures. Screw
lock the top side of the backpack.
Align the four matching pegs on the back of
the main unit as circled in the left picture with the four
matching holes in the wall mount brackets as also
marked in circles in the top pictures and allow the main
unit to slide down the winding grooves in the wall
mount backpack. Connect all cables coming out of the