Filter
Top Products
Part 18
make sure that the software application has the ability to power off the
machine. In preloaded Windows, “Posiflex Power Switch Manager” in
“Posiflex Tools” in the Program Files helps managing these functions.
Software Support Features
The Jiva series provides a software power off for application program
maneuvers as mentioned above. The Jiva also provides a specific means for the
software to detect if the system is working on external or UPS battery power.
So the compatible software applications have the ability to change operating
conditions when running on standard/backup power. The software programmer
may take reference from the Jiva technical manual to apply such features.
Automatic Power On Control
The system may also turn on according to some preset conditions
such as Modem Ring Up or Alarm Clock Wake Up or LAN Wake Up.
To utilize Modem Ring Up or Alarm Clock Wake Up function, please
enter the CMOS setup, “Power Management Setup”, “PM Wake Up Events”
and enable the “Ring Power Up Control” or “Power Up by Alarm”. Save the
configuration and exit the CMOS setup program. For LAN wakeup, an
operating caller system connected through LAN to the system is required. It
also requires a qualified networking technician to check the LAN chip ID of
the system for the caller system to wake up.
When the Jiva system is turned off after a successful boot up, the
preset automatic power on functions will turn on the system when the preset
conditions are met. But if the Jiva system is improperly turned off before a
complete boot up procedure, the above preset power on control functions will
be disabled until next turning off after a complete boot up.
DISPLAY ISSUES
Main LCD Display
For best viewing result please set your display resolution at 1024 x
768 with high color.
In configuration of system memory, max. 64 MB can be shared as the
video memory.
VGA Port
The VGA port in the Jiva system supports Posiflex stand alone touch
or LCD monitors like TM-4115, LM-6212 or TM-7112 if there is no base
mount 2
nd
LCD display. This port supports extended mode dual display
function in WinXP. To support the DC power to these Posiflex monitor, use
the DC adaptor for TM-4115 / TM-7112. Connect the adaptor to VGA cable or
use Posiflex VGA + power cable and set an internal jumper in the main unit to