Filter
Top Products
Part 8
V. PROGRAMMING THE KEYBOARD
A. UTILITY INSTALLATION
FOR KB-6600:
There are in total three methods to program the programmable keys in
the PS/2 interface KB-6600 series keyboard: “RWM.EXE” the straightforward
direct read/write programming utility under DOS or Windows DOS box;
“KBM.EXE” the normal programming utility under DOS or Windows DOS
box or “KBW.EXE” the normal programming utility under Windows.
In the attached product information CD, please find subfolder of
“KBM.xxx” in folder \Drivers\KB\KB6600\PS-II where “xxx” can represent
the driver version. In the subfolder, there is a file named “INSTALL.EXE” for
installation of all the utilities into operating system like Windows 98, and DOS.
The user may install the programming utility by following the step by step
instructions from this executable program. Both “KBM.EXE” and
“RWM.EXE” will be installed after completion. Please select the right model
when entering the “KBM.EXE” program. The user may refer to the
information on our web site for a preview of this program.
A programming utility that is referred to as “KBW.EXE” in this manual
is developed particularly for the Windows 98/2000/XP environment. Please
find in folder \Drivers\KB\KB6600\PS-II of the product information CD the
subfolder “KBW.xxx” where “xxx” can represent the driver version and
double click the “Setup” program in the subfolder to install the whole utility.
After completion of the “Setup”, there will be a program group “Posiflex
Tools” in the program files. Clicking the program “Posiflex Programmable
Keyboard” in this group will activate the KBW.EXE for the KB-6600 series.
Please select the right model when entering the program.
FOR KB-6600U:
The methods to program the programmable keys in USB interface
KB-6600U series keyboard is “uKBW.EXE” the only programming utility
under Windows capability.
To install this utility please find in folder \Drivers\KB\KB6600\USB of
the product information CD the subfolder “uKBW.xxx” where “xxx” can
represent the driver version and double click the “Setup” program in the
subfolder to install the whole utility. After completion of the “Setup”, there
will be a program group “Posiflex Tools” in the program files. Clicking the
program “Posiflex USB Programmable Keyboard” in this group will activate
the uKBW.EXE for the KB-6600 series. Please select the right model when
entering the program.