Filter
Top Products
Part 11
USING THE TOUCH TERMINAL
APPLICATION ENVIRONMENT
It is very important that you check the following operational
guidelines:
Ventilation
This terminal must NOT be operated in an environment with
restricted ventilation. There must be at least 25 mm air clearance around any
top or side ventilation holes with a free flow of air around the unit at ALL
times for the installation.
Operating Environment
The equipment must not be operated or stored in extremes of both
temperature and humidity/moisture. (Operating range 5°C to 40°C and up to
80% humidity – non condensing, max. wet bulb 26C)
Power Supply
The operating voltage range of the power adaptor should cover the
local power supply for proper operation. The power cable, the power outlet
and any power fusing arrangements must conform to local safety regulations.
Please never do any connection / disconnection when system is still
powered on. Please always keep the external power adaptor in a free air
circulation.
POWER ON/OFF CONTROL
Power Indicator
There is a power indicator LED at center of lower rim of LCD panel.
This LED lights up orange when external power is ready and turns to blue
when system power is turned ON.
Hardware Power Switch
The power switch located at left side of the
main unit is a tactile pushbutton switch. This switch
controls the power on/off of the system. This switch
turns the system on when pushed only when external
power is present. This switch turns the system off
when pushed again during power on status. However,
if the system hangs due to any reason such as
software resource conflict a simple push on the
switch may fail to turn off the power. In this case,
please utilize the forced power off feature by pressing the switch and holding