Filter
Top Products
Part 7
OPENING BASE BACK COVER
In order to settle the
touch terminal properly in a
point of sale system, all the
cable connections have to be
routed through its base.
Therefore, please observe
the side view pictures of the base trunk at the left and release the triangle
marked hooks to remove the back cover.
CABLE ROUTING IN BASE
For cable routing in the mini slim base,
please refer to the picture at left. There is a cable
tie inside the base trunk as arrowed in the picture.
Hold all the external cables with the cable tie.
Have all cables to pass through the oval hole on
the trunk as triangle marked to come out of the
front side of trunk. Connect all the cable ends to
main unit. Should there is the option SATA HDD
in base installed, please double check that the
HDD cables must be still secured.
BASE MOUNT UPGRADE KIT (OPTION)
Pole Display
For the KS-6812 series with
mini slim base, the LCD customer
display PD-309/U or the VFD PD-
2605/U can be attached to either rear
corner of base bottom. Refer to the
pictures at right. Use the 3 attached
screws to fix the metal base plate of the PD to bottom
plate of mini slim base at the circled positions (the
holes marked with “KS” on bottom plate of PD against
the holes marked “P” on bottom plate of KS system).
Connect the interface cable to go into the base through
cable exit arrowed at right to the main unit.