Filter
Top Products
TP6000 USER’S MANUAL 4 - 3
INSTALLING UPS BATTERY
Place the optional UPS battery in the battery compartment in the way as
indicated in the picture. Screw on the battery cover and join the battery cable into the
cable routing operation. Please enable UPS function in software setting before use.
ROUTING THE CABLES
Place all the cables required for connections to
the TP6000 series except those for special application
purposes into the cable passage. Inset one end of the
cable passage cover under the battery cover and screw
on the two screws. Be sure not to damage any of the
cables during this operation.
Now, turn the adjustable paddle assembly back to
normal orientation and arrange all cables to come out of the
area for mounting main unit from the bottom edge for ease of
later operation.
UPS Battery
Removed
Battery
Cover