Filter
Top Products
TP6000 USER’S MANUAL 4 - 4
PREPARING THE MAIN UNIT
On the back of the main unit, there are 4 matching pegs and a service window.
Push open the service window in the direction as indicated in the picture, one can find
a button cell battery socket, a 1 x 3 header (JP10) with 1 jumper and a 2 x 3 header
(JP8) with 2 jumpers.
This battery socket accepts a 3 V button cell Lithium battery (CR2032)
required to support the system real time clock. The jumpers in this window are
designated for COM port power supply and UPS battery detect function. Please
consult your dealer for technical support on setup of these jumpers. A new Lithium
battery can support the system RTC for about 3 years. After the battery is nearly
exhausted, the user must change a new battery otherwise the system RTC and system
configuration setup will be lost.
JOINING MAIN UNIT AND PADDLE
Match the matching pegs on the back of the main unit against one of the two
sets of matching holes on the paddle. It is recommended to hook on the lower set of
holes for better stability. First aim the matching pegs toward the upper round part of
Service
Window
Push Open
To The
Right
4 Matching
Pegs
Matching HolesMatching Pegs
Round Part
Slot Part
Removal
H
ollow