Filter
Top Products
Part 19
TOUCH PANEL (for TP models only)
All paragraphs below are applicable in TP-5615, TP-5715, TP-5815
or TP-8015 only. The user of LT-5615, LT-5715, LT-5815 or LT-8015 can
ignore them and consider this user’s manual ends here.
Mouse Emulation
The touch panel in Jiva TP system uses PS2, RS232 or USB interface.
When its driver is properly installed, this touch panel works exactly like a
standard mouse. However, if the system is running under safe mode, most
drivers are disabled in this mode and the touch panel calibration is therefore
not guaranteed. It is recommended to use a standard USB mouse or keyboard
in this mode.
All the below mentioned mouse emulation functions can be
manipulated through relevant software. The system can give a beep and a click
on the left button of a mouse at the point when the touch panel is touched. If
the point touched is dragged across the screen surface, it works as the mouse
drag and drop feature. If the point is touched, released and touched within a
short time interval, it is double-clicking left button of the mouse. To obtain the
effect like clicking on the right button of a mouse, touching any point on the
screen surface after touching the right-click sticky button results as a click on
the right button of the mouse at that point.
Posiflex Touch Terminal Manager
A program named “Posiflex Touch Terminal Manager” and a right-
click sticky button tool in the program group “Posiflex Tools” is installed in
the preloaded Windows system with a PS/2 interface touch panel controller.
This program can also be obtained by download from the POSIFLEX web site.
RS232 Touch Controller
If the Jiva TP system purchased is the leading edge Infra Red type
touch models, the touch controller is of RS232 interface. The “Posiflex Touch
Terminal Manager” above should be disregarded. In these models within TP-
5615, TP-5715 or TP-5815, the COM4 position of the system will be covered
in the connection area. Removal of this cover will void the product
warranty!!
Once the RS232 touch controller driver is installed, the user can
utilize it to control the mouse emulation. Please click “Start”, “Settings”
“Control Panel” and “Elo Touchscreen” or just click the “elo” icon in tool tray
to engage this utility. However, with this touch controller driver, certain
display mode like full screen display of Windows DOS box should be avoided.
Posiflex USB Touch Manager
A program named “Posiflex USB Touch Manager” and a right-click