Primera Technology III Printer User Manual


 
34
Maintenance and Troubleshooting
drive utility to test the hard drive for fragmentation. If
fragmentation is greater than moderate, you will need to
reinitialize to optimize the hard drive.
Hard Drive Too Slow
If you have an older hard drive, it may be too slow in
transferring data to the recorder. Try using a slower
recorder speed (1X or 2X). If you are still not successful
you need a faster hard drive.
E. BRAVO NOT ACCESSIBLE
If the Bravo or its recorder are not "seen" by the system, make
sure that the proper software is loading in the System Folder.
Items to double check are the USB (USB manager V1.2 or
higher) and FireWire (FireWire V2.1 or higher) drivers
(available from Apple). Also check to ensure a tight fit for all
USB or FireWire cabling.
F. CLEANING THE INK CARTRIDGES
It may be necessary to clean the ink cartridge nozzles if the
printer portion of your Publisher does not seen to be laying
down ink evenly or if you suspect an cartridge nozzle has
become slightly dried out or clogged. Refer to section 3-A for
more information on performing a clean function through the
Publisher's printer driver.
G. CLEARING A MEDIA JAM
If a disc should become jammed inside the printing area of the
Publisher, with the lid closed press the Cartridge Button. This
will eject the Printer Tray. Then open the lid. The Cartridge
Carrier will move o the center position automatically.
WAIT FOR THE CARTRIDGE CARRIER TO STOP MOVING!
Then carefully move the cartridge carrier assembly to the left
to gain access to the printer tray.
H. TECHNICAL SUPPORT
If you have difficulties in operating your Publisher, the
procedures in this manual and the Prassi software User's
Guide should, in most cases, solve the problem. If you still
have difficulty, contact the technical support number listed
on the insert included in the supply pack that came with
your Publisher.
510701a.qxd 3/13/03 11:09 AM Page 34
TOC
INDEX