Filter
Top Products
2. Connect the VGA cable from the VGA IN port on the AV322 to the VGA
OUT port on the computer.
3. Connect the RS-232 Adapter (Optional) to the RS-232 port on the
AV322 and the RS-232 port on the computer.
English - 13
4.3 Getting Started
Control panel Remote Control
z To turn on the AV322 with the remote control, aim at the remote
sensor at the AV322 and press the Power button.
z Once the AV322 is powered on, the LED on the projector will flash a
few times and then remain lit. Contact your distributor if the LED fails
to light.