VTrak M310p, M210p Quick Start Guide
18
If you are uncertain about choosing parameters for your disk array, use the
Automatic option.
Follow these steps to create a new disk array.
1. Check the boxes to select any one or a combination of:
• Redundancy – The array will remain available if a physical drive fails
• Capacity – The greatest possible amount of data capacity
• Performance – The highest possible read/write speed
• Spare Drive – A hot spare drive
2. In the Number of Logical Drives field, enter the number of logical drives you
want to make from this disk array.
The maximum possible number of logical drives appears to the right of this
field.