Filter
Top Products
Chapter 2 Hardware Configuration
EB-471LF USER
′
S MANUAL
Page: 2-13
2-17. CLEAR CMOS DATA SELECTION
JP3 : Clear CMOS Data Selection
The selections are as follows :
FUNCTION
JUMPER SETTING
(pin closed)
JUMPER
ILLUSTRATION
Normal Open
Clear CMOS Close
*** Manufacturing Default is set as Normal.
Note: To clear CMOS data, user must power-off the computer and set the jumper to
“Clear CMOS” as illustrated above. After five to six seconds, set the jumper back to
“Normal” and power-on the computer.