Filter
Top Products
TubeWave uses the same pseudorandom
generation of frequencies as MultiWave2
waveform, however it generates more tube-
friendly frequencies.
[P-1] MultiWave1
MultiWave1 is a single 60Hz sine wave with
a minute amount of 3
rd
Harmonic sine waves
mixed together to form a single partial square
MultiWave. This is an improved version of PS2
from the original MultiWave™ series.
The partial square wave setting improves the
power supply’s ability to charge the capacitors
in equipment by extending the length of time
available to "top off" the capacitors' voltage.
Use this setting to enhance the performance
of both source and power equipment.
[P-2] MultiWave2
MultiWave2 is a 60Hz sine wave that
incorporates a pseudorandom collection of
frequencies which are dithered from 55-65Hz.
Using this slightly random frequency deviation
is similar to adding dither on a digital audio
source. Power supply dithering can lower
the perceived noise floor and help remove
apparent glare on the audio signal.
[P-3] MultiWave3
MultiWave3 is a combination of Multiwave1
with a slight degree of 3
rd
harmonic addition
(MultiWave1).
Try this setting and see how the audio sounds
and the video looks. All systems can respond
differently to each MultiWave pattern.
[P-4] MultiWave4
MultiWave4 is full combination of MultiWave1
and MultiWave2. It generates a pseudorandom
collection of frequencies, however instead of
generating sine waves it generates the same
waveform as MultiWave1.
Again, try these setting on your system to see
which one has the highest perceived benefit in
terms of performance.
Warranty inside the U.S. and
Canada
PS Audio’s warranty is 3 years parts and labor,
from the date of original purchase. This means
that we warranty the product itself regardless
of ownership, new or used.
Warranty outside the U.S. and
Canada
PS Audio has authorized distribution in many
countries of the world. In each country, the
authorized importing retailer or distributor has
accepted the responsibility for warranty of
products sold by that retailer or distributor.
Warranty service should normally be obtained
from the importing retailer or distributor from
whom you purchased the product. In the
unlikely event of service required beyond the
capability of the importer, PS Audio will fulfill
the conditions of the warranty. Such product
must be returned at the owner’s expense to
the PS Audio factory. Contact your PS Audio
distributor or the PS Audio customer service
department for more information.
Service issues
Should your unit ever require service or if
you have any technical questions about the
MultiWave II++ kit, you must either contact
your dealer (PS Audio if purchased direct) or
your PS Audio distributor. No equipment will
be received at our service facilities without an
attached RA number.
If purchased through an authorized PS Audio
dealer or distributor, the RA number must be
obtained by the dealer or distributor. If the
product was purchased from PS Audio direct,
this can easily be obtained by contacting PS
Audio at:
E-mail - service@psaudio.com
Phone - 720.406.8946
Fax - 720.406.8967
http://www.psaudio.com
8