Filter
Top Products
Terminal Setup
Select RF Monitor from the Tools menu.
RF Monitor is an "Over The Air" diagnostic tool. It is used to collect diagnostic trace
information from RF terminals running PowerNet Twin Client software.
It runs on a Windows PC and will send a command to the RF terminal to start tracing.
The terminal, when it receives this command, will start sending the trace information
over the RF link to the PC that issued the command. This will be written to a file on this
PC that can be sent to us for analysis.
Click on
File to Select Terminal or to Exit.
Choosing
Select Terminal allows you to view a log of the terminal’s activity. Enter the
Terminal IP Address and Terminal IP Port, and click on
OK.
Supported Equipment Manual
•
May, 2006
2-36