Filter
Top Products
Quick Reference Guide 5
Productivity Index Reporting Option —Your 8200 scanner may be equipped with the
optional Productivity Index Reporting™ feature. This feature allows for data
collection on the readability index of bar codes scanned by the scanner. This
data may be transmitted to the POS Terminal where it may be easily sorted for
action by the MIS department to improve bar code quality at the front end.
For additional information on how to enable Productivity Index Reporting in
your scanner, please refer to the Product Reference Guide (PRG).
Hold, then
release when the
beeper sounds
Increments tone
Press the push button for approximately 2 sec-
onds, then release. Each time this is done, the
beeper will sound at one of three tones. Stop
when the desired tone (high, medium or low)
is sounded.
4 Seconds
Scanner Diagnostics
Mode
a
This mode allows system support personnel to
troubleshoot problems with the scanner. Press
the button for eight seconds or cycle power to
exit Scanner Diagnostics Mode and reset the
scanner.
8 Seconds
Resets Scanner
b
Only system support personnel should per-
form a reset.
a. By standard default, this function is normally disabled to prevent accidental activation
by users.
b. Users should not perform scanner resets except under the direction of trained sys-
tems support personnel.
PRESS
DURATION
FUNCTION COMMENT