Filter
Top Products
4
PowerScan™ RF
Scanner
2. Consult your Host Terminal manual to determine the
required communication parameters for the Host Terminal
(e.g., baud rate, parity, etc.) and, if necessary, modify the pro-
grammed parameters to be compatible with those require-
ments. Scanner and Base Station programming is performed
using one of the following:
- Configurator Express™ Programming Software
- PowerScan™ Bar Code Scanner Programming Guide
3. Connect the I/F cable to the proper port on the Host Terminal
(check your Host Terminal manual to determine hardware
requirements).
4. Connect the AC Adapter's power cord at the Base Station and
plug the AC/DC adapter in at the wall outlet (see Figure 3).
The Base Station’s POWER LED should be illuminated when
the unit is properly connected to power.
Figure 3. Connecting Power to the Base Station
NOTE
See
References
for more information about how to
obtain software and manuals for this product.
CAUTION
The Host Terminal manual should also be consulted
as to whether power must be turned off before con-
necting peripheral devices. Ensure that the correct
procedure is followed to avoid damage to equip-
ment or interruption of system functions.