PSC Scanners Scanner User Manual


 
64 Users / Programming Guide
Marker Beam
The Marker Beam feature provides the user with a spotter beam for
improved aiming at distant bar code labels and/or in extremely
bright environments. You may also find a Marker Beam useful when
scanning through showcase glass or bar code menus with labels in
close proximity. This feature is available in all scanners without fac-
tory authorization.
To activate the Marker Beam, the user must also program the dura-
tion of the Marker Beam. First, the symbol Enable Marker Beam is
scanned and then followed by scanning one digit symbol from the
Digit Selections table. Each digit symbol represents the desired time
duration of the Marker Beam in milliseconds.
To deactivate the Marker Beam, the user must scan the Disable
Marker Beam symbol. For successful programming, the user must
hold the trigger down for two seconds after scanning.
NQ Enable Marker Beam
NP Disable Marker Beam