Filter
Top Products
2 – QLA4010/4010C
Label
IS0053302-00 B 2-3
Q
2.2
Specifications
Tables 2-1 and 2-2 define the QLA4010/4010C HBA specifications.
2.3
Label
The transceiver on the QLA4010 HBA is a Class I laser product. It complies with
IEC 825-1 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be
operated under recommended operating conditions.
Table 2-1. QLA4010/4010C HBA Operating Environment
Environment Minimum Maximum
Operating temperature 0°C/32°F 55°C/131°F
Storage temperature –20°C/–4°F 70°C/158°F
Relative humidity (noncondensing) 10% 90%
Storage humidity (noncondensing) 5% 95%
Table 2-2. QLA4010/4010C HBA Specifications
Type Specifications
Universal PCI specifications PCI Local Bus Specification, revision 2.2
PCI-X Specification, revision 1.0a
32/64-bit, 33/66/133 MHz
3.3-V and 5-V buses supported (± five percent)
Standards IP v.4
SCSI Architecture Model (SAM-2)
SCSI-3 Command Set
Connectors Optical mutimode cable with an LC-style duplex connector
(QLA4010 HBA)
Cat5e or Cat6 straight-through cable (not cross-over
cable) with an RJ45 connector (QLA4010C HBA)
Form factor PCI short card
Operating power 15 watts
CLASS I LASER PRODUCT