Q-Logic 9000 Network Hardware User Manual


 
6
Step 10. Run the Configuration Wizard
Double-click the Enterprise Fabric Suite 2007 shortcut, or select Enterprise Fabric Suite 2007 from Start menu,
depending on how you installed it.
The Configuration Wizard tool auto-detects and configures the switch based on selected options and recommended
settings. Follow the instructions to set network parameters and the password. The default user name is admin; the
default password is password.
NOTE: If you are using an Ethernet switch and the auto-connect process fails due to a time out, try a direct Ethernet
connection from your workstation to the switch. Use an Ethernet cross-over cable only if your workstation has a GbE port.
Step 11. Connect Devices and Switches
Connect fiber optic cables between the installed transceivers and their corresponding devices. Each port
auto-negotiates the proper port type with the connected device or switch.
Congratulations
You have successfully installed your QLogic 9000 Series Switch
For information about ordering additional I/O blades and accessories visit
http://www.qlogic.com/Products/SAN_products_FCS_san9000.aspx
.