Filter
Top Products
Functional Specifications
Quantum A-Series Tape Drives User’s Guide 38
Current and Power
Requirements 1
The tape drive draws the highest current (and power) during the native
write modes.
Standby is measured with the tape loaded and tensioned or
untensioned, and
Idle is measured with power on with no tape loaded.
(The power drawn in these two modes is similar enough that they are
listed together.)
Table 13 Current
Requirements — SCSI
Interface
Application X,Y,Z axes Sweep rate = 1.0 octave/
minute
Note: In table 13
, the current and DC power values pertain to the
internal tape drive, while the AC power values apply to the
tabletop tape drive.
Mode
5 V Current (A)
MaxPk
1
MaxMean
2
Typ
3
12 V Current (A)
MaxPk
1
MaxMean
2
Typ
3
DC Power (W)
Max
4
Typ
5
AC Power (W)
Max
6
Typ
7
Standby/Idle 2.5 2.5 2.5 0.7 0.7 0.7 2.5 2.5 2.5 0.7
Media Loading/
Unloading
3.8 3.8 3.4 2.2 2.1 1.7 3.8 3.8 3.4 2.2
600A Write –
Motor Start
8
3.4 3.4 3.3 2.0 1.2 1.1 3.4 3.4 3.3 2.0
600A Write –
Streaming
3.7 3.7 3.5 2.0 1.1 1.1 3.7 3.7 3.5 2.0
Shock