Filter
Top Products
4.2Viewing the QSP-100 Resource Settings
The following steps detail how to view the resource settings that Windows 95 has allocated for
the QSP-100.
1. Double click on the My Computer icon located on the Windows 95 desktop. This
opens a folder showing various drives, Control Panel, etc.
2. Double click on the Control Panel icon. This opens another folder with many
different system utilities.
3. Double click on the System icon. This opens the "System Properties" window.
4. Click on the "Device Manager" tab. Double click on the item "Ports (Com &
LPT)" located within the list of hardware.
5. Double click on any of the items labeled "Quatech Multi- port(COM x)" where x
represents the logical COM port number. The items labeled "Quatech Multi-port"
are the child devices of the QSP-100 parent device. Click the "Resources" tab at the
top of the "System Properties" box.
6. The base I/O address and IRQ level displayed here is the base I/O address and IRQ
level of the entire parent device. The resources cannot be modified here. For
information on how to change these settings, got to the section labeled "Changing
Configuration of the QSP-100".
7. Use the Logical Com Port name to access any of the particular serial ports on the
QSP-100. This name is required by a Windows 95 application when accessing a
particular port.
4.3 Changing Configuration of the QSP-100.
To change the hardware configuration of the QSP-100, follow the instructions below.
1. Double click the My Computer icon located on the Windows 95 desktop.
2. Double click on the Control Panel icon.
3. Double click the System icon inside the Control Panel folder. This will open the
System Properties box.
4. Click the Device Manager tab located along the top of the System Properties box.
5. Double click on the device group "Quatech Comm Adapters". The QSP-100
model name should appear in this list. If either the "Quatech Comm
Adapters" group or the QSP-100 model number does not appear, contact Quatech
Technical Support for further assistance.
QSP-100 Users Manual 26