Filter
Top Products
3
CONNECTING THE USB
C
ONTROL ADAPTER SOCKETS
Your surge protector’s convenient USB
CONTROL ADAPTER
sockets let you use
your computer to turn any device connected
to these sockets on or off instead of turning
the devices on and off individually. When
you turn your computer on or off, the
connected
USB CONTROL ADAPTER sockets
are also turned on and off.
1. Connect your computer to one of the
surge protector’s
CONTINUOUS
sockets.Ô
2. Connect the AC adapter plug of the
devices (computer peripherals) that you
want to be turned on or off by the
computer to the surge protector’s
USB CONTROL sockets.
3. Connect the surge protector’s USB plug
to the computer’s USB port.
4. To activate the surge protector’s USB
control function, press
USB CONTROL
ON/OFF
in. USB CTRL lights. The
peripherals connected to the sockets
labeled USB CONTROL turn on when
you turn on your computer and turn off
when you turn off your computer.
5. To turn off the surge protector’s USB
control function, press
USB CONTROL
ON/OFF
out. USB CTRL turns off. The
peripherals connected to the sockets
labeled USB CONTROL stay on
whether your computer is turned on or
off.
CONNECTING THE COMPUTER
N
ETWORK DEVICE’S AC
P
OWER CORD(S)
Connect your computer network devices’
grounded AC power cords (up to seven) to
the surge protector’s AC sockets and AC
adapters (up to four) to the surge protector’s
USB CONTROL sockets. You can also
connect extra grounded AC plugs (excluding
the computer’s) to the
USB CONTROL
sockets if you want their power to be
controlled by the connected computer.
OPERATION
After you complete all the connections, plug
the surge protector’s AC power cord into a
three-prong standard grounded AC outlet.
The GROUNDED WHEN LIT and
PROTECTED WHEN LIT indicators light.
If any of the indicator lights fail, see
“Troubleshooting” on Page 4.
FCC STATEMENT
Your surge protector complies with Part 68
of FCC Rules and the requirements adopted
by the ACTA. On the bottom of this product
is a label with this product’s FCC Product
Identification number in the format
US:AAAEQ##TXXXX. If requested, you
must provide this information to the
telephone company.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA.
A compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a compatible
modular jack that is also compliant. See
installation instructions for details.
If your home has specially wired alarm
equipment connected to the telephone line,
ensure the installation of this surge protector
does not disable your alarm equipment. If
you have questions about what will disable
alarm equipment, consult your telephone
company or a qualified installer.
You must not connect your surge protector
to:
• coin-operated systems
• most electronic key telephone systems
Your surge protector is not intended to be
used with party-line systems. Connection to
party line service is subject to state tariffs.
Contact the state public utility commission,
public service commission, or corporation
commission for information.
We have designed your surge protector to
conform to federal regulations, and you can
connect it to most telephone lines. However,
each surge protector (and each device,
such as a telephone or answering machine)
that you connect to the telephone line draws
power from the telephone line. We refer to
this power draw as the device's ringer
equivalence number, or REN.
The REN is used to determine the number
of devices that may be connected to a
telephone line. Excessive RENs on a
telephone line may result in the devices not
ringing in response to an incoming call. In
most but not all areas, the sum of RENs
should not exceed five. To be certain of the
number of devices that may be connected to
a line, as determined by the total RENs,
contact your local telephone company. For
products approved after July 23, 2001, the
REN for this product is part of the FCC
Product Identification number in the format
US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3). For
earlier products, the REN is shown
separately on the label.
If you use more than one phone or other
device on the line, add up all of the RENs. If
the total is more than five (three in rural
areas), your telephones might not ring. If
ringer operation is impaired, remove a
device from the line.
Ô NOTE Ô
Do not connect your computer’s AC plug to the
USB CONTROL sockets. The power on and
off for these sockets is controlled by your
computer.
USING THE SAFETY SLIDE
C
OVER
Your surge protector is equipped with
safety slide covers on each of its 11 AC
sockets. Slide the cover up to protect
each unused AC socket.
USING THE INDICATION
T
AGS
Your surge protector comes with pairs
of indication tags to identify which
device’s power cord is connected to
which AC socket. Stick a large color
tag on the power cord at the rear of the
device and the same color small tag
next to the surge protector’s target AC
socket.
LIMITED FIVE-YEAR WARRANTY
AND CONNECTED EQUIPMENT GUARANTEE
(Continued)
defect by surge protector repair without charge for parts and labor;
(b) replace the surge protector with one of the same or similar
design; or (c) refundthepurchase priceof thesurge protector.
To make a warranty claim for a defect in the surge protector without
a claim for surge-induced damage to Connected Equipment, you
must, during the Warranty Period, take the surge protector and the
RadioShack sales receipt as proof of purchase date to any
RadioShack store.
All replaced parts, products, and Connected Equipment and prod-
ucts and Connected Equipment on which a refund is made,
become the property of RadioShack. New or reconditioned parts
and products may be used in the performance of warranty service.
Repaired or replaced parts in surge protectors and replacement
surge protectors are warranted for the remainder of the Warranty
Period. You will be charged for repair or replacement of the product
made after the expiration of the Warranty Period.
This Limited Warranty and Connected Equipment Guarantee does
not cover: (a)damageor failure caused by or attributable to acts of
God, abuse, accident, misuse, improper or abnormal usage, failure
to follow instructions, improper installation or maintenance, alter-
ation, lightning; (b) any repairs other than: (i) surge protector
repairs provided by a RadioShack Authorized Service Facility; and
(ii) reimbursement of the cost of initial repairs to Connected Equip-
ment performed by a service center authorized by the manufac-
turer of the Connected Equipment; (c) consumables such as fuses
or batteries; (d) cosmetic damage; (e) transportation, shipping or
insurance costs; or (f) costs of product or Connected Equipment
removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also
haveotherrightswhichvaryfrom state tostate.
RadioShack CustomerRelations, 200 Taylor Street,Sixth Floor,
Fort Worth, Texas 76102
04/02
61-2425.fm Page 3 Thursday, March 20, 2003 10:28 AM