Radio Shack LK-1500 Mouse User Manual


 
E-44
Overdubbing a Performance
Recording
You can use the following procedure to record a melody in
Track 2 so it combines with a recording you previously made
in Track 1.
1
Press the RHYTHM button to enter the rhythm
mode.
2
Use the SONG MEMORY button to select record
standby.
3
Press the RIGHT/TRACK 2 button to select Track 2
as the recording track.
4
Select the tone you want to use.
5
Press the controller block START/STOP button.
This starts playback of Track 1 and recording in Track
2.
6
Play the melody notes you want as you listen to
the playback from Track 1.
7
To stop recording, press the controller block START/
STOP button again.
If you make a mistake, you need to go back and re-
record from step 2.
If you want to immediately hear what you recorded,
press the controller block START/STOP button again.
NOTE
Track 2 is a melody-only track, which means that chord
accompaniment cannot be recorded there. Because of
this, the entire range of the keyboard becomes a melody
keyboard when recording the Track 2, regardless of the
current MODE switch setting.
If you want to record without playback from a recorded
track, enter playback standby, deselect the playback
track, and then enter record standby. Note, however,
that you cannot turn off rhythm and Auto
Accompaniment.
FlashingFlashing
Song Memory Function
649U-E-046A
Track 2 Data
In addition to notes played on the keyboard, the following
data is also recorded to Track 2.
Tone number
Pedal operations
Deleting a Specific Part/Track
You can use the following procedure to delete a specific
part/track from a lesson recording or performance recording.
Getting Ready
When deleting a lesson recording part
Press the SONGS button or PIANO SONGS button.
When deleting a performance recording track
Press the RHYTHM button.
1
Press the SONG MEMORY button to enter record
standby.
2
Select the part/track you want to delete by pressing
the LEFT/TRACK 1 button or RIGHT/TRACK 2
button.
3
Hold down the SONG MEMORY button.
This causes a confirmation message to appear on the
display.
To cancel the delete operation, press the [] (NO)
button .
4
Press the [+] (YES) button to delete the part/track.
This causes the keyboard to return to Song Memory
playback standby.
NOTE
Pressing the SONG MEMORY button while the part/track
delete screen is on the display returns to record standby.