Filter
Top Products
11
2. Using a pointed object, such as
a straightened paper clip, press
RESET
on the back of the scan-
ner. The display resets, and the
scanner turns off.
3. Press
POWER
to turn on the
scanner again.
INITIALIZING THE
SCANNER
If the scanner or its display does not
work properly even after resetting it,
follow these steps to initialize the
scanner.
Caution:
Initializing the scanner
clears all the channels you stored in
memory. Initialize the scanner only
when you are sure it is not working
properly.
1. If the scanner is off, press
POWER
to turn it on.
2. Hold down
•
/CLEAR
, then press
RESET
on the back of the scan-
ner using a pointed object, such
as a straightened paper clip.
The display resets, and the
scanner turns off.
3. Press
POWER
to turn on the
scanner.
RESETDC 12V
EXT SP
RESET
DC 12V
EXT SP
ANT
20-417.fm Page 11 Wednesday, August 4, 1999 11:33 AM