Filter
Top Products
20
SEARCHING FOR AND
TEMPORARILY
STORING ACTIVE
FREQUENCIES
You can search for frequencies using
a limit or direct search, then tempo-
rarily store frequencies into monitor
memories.
Limit Search
A limit search lets you search for ac-
tive transmissions within a specified
range of frequencies.
Note:
You can also use the scan-
ner’s delay feature while using a limit
search (see “Using the 2-Second De-
lay” on Page 27).
Follow these steps to search for ac-
tive frequencies using a limit search.
1. Press
PGM
, then
LIMIT
.
Lo
and a
frequency appear.
2. Using the number keys, enter
the lowest frequency (including
the decimal point) you want to
search within the desired fre-
quency range, then press
ENTER
.
Note:
If you enter an invalid fre-
quency,
Error
appears. To cor-
rect this, simply repeat the step.
3. Press
LIMIT
.
Hi
and a frequency
appear.
4. Using the number keys, enter
the highest frequency you want
to search within the desired fre-
quency range, then press
ENTER
.
5. Press D to search upward from
the lower to the upper limit, or
press — to search downward
from the upper to the lower limit.
-L-
,
SEARCH
, and s or t
appear, and the next available
monitor memory flashes.
20-417.fm Page 20 Wednesday, August 4, 1999 11:33 AM