Filter
Top Products
25
TURNING CHANNEL-STORAGE BANKS ON
AND OFF
You can turn each channel-storage bank on and off. When you turn off
a bank, the scanner does not scan any of the 10 channels in that bank.
While scanning, press the number key corresponding to the bank you
want to turn on or off. If the memory bank indicator is on, the bank is
turned on and the scanner scans all channels within that bank that are
not locked out. If the indicator is off, the scanner does not scan any of
the channels within that bank.
Notes:
• You can manually select any channel in a bank, even if the bank is
turned off.
• You cannot turn off all banks. One bank is always active.
SEARCH SKIP MEMORY
You can skip specified frequencies during a limit or direct search. This
lets you avoid unwanted frequencies or ones you have already stored
in a channel. You can program up to 30 skip frequencies into the scan-
ner’s memory.
To skip a frequency, press
LOCKOUT/S/S
when the scanner stops on the
frequency during a limit or direct search.
To clear a single frequency from skip memory so the scanner can stop
on it during a limit or direct search, press
LIMIT
to hold the search, press
t
or
s
to select the frequency, then press
LOCKOUT/S/S
until
L/O
disap-
pears from the display.
Memory Banks 3 & 4 are Turned Off
20-509.fm Page 25 Wednesday, August 4, 1999 1:58 PM