Filter
Top Products
23
3. To change the search direction, press t to search downward or s to
search upward.
b
,
SRCH
, and t or s appear on the display.
4. When the scanner stops on an active frequency, you can do one of
the following:
• To store the displayed frequency into the monitor memory,
press
MON/0
.
MON
appears on the display.
• To continue the search, press t or s.
• To hold the frequency, press
HOLD/BAND
.
H
appears on the
display. To continue the search, press and hold t or s for about 1
second. Or, you can press
HOLD/BAND
to continue the search.
The scanner briefly displays the frequency band (if you pressed
HOLD/BAND
), then resumes searching.
Notes:
• If you want to step through the frequencies while
H
is displayed,
press t or s.
• If you tune to a search skip frequency,
L
appears on the display.
See “Search Skip Memory” on Page 24.
• If you want to change the frequency band, repeatedly press
HOLD/BAND
. The selected frequency band is displayed.
Direct Search
You can search up or down for more frequencies from the currently dis-
played frequency.
1. Press
MANUAL
.
2. Use the number keys and
CLEAR/
•
to enter the frequency (includ-
ing the decimal point) where you want to start the search, or enter
the channel number containing the starting frequency and press
MANUAL
.
3. Press t to search downward or s to search upward from the
selected frequency.
d
,
SRCH
, and t or s
appear on the display.
4. When the scanner stops on a transmission, you can do one of the
following:
• To store the displayed frequency into the monitor memory,
press
MON/0.
MON
appears on the display.
20-511.fm Page 23 Wednesday, August 4, 1999 2:13 PM