Filter
Top Products
25
You can search these bands to quickly find active frequen-
cies you might want to store into the scanner’s channels.
For example, if you wanted to search for transmissions be-
tween amateur radio operators, you could search only the
search bands where you are most likely to hear the trans-
missions (Bands 0, 1, 3, and 6). See “Band Search” on
Page 29.
Note: The frequencies in the scanner’s search bands are
preset. You cannot change them.
Monitor Memory
The scanner also has a monitor memory that you can use
to temporarily store a frequency while you decide whether
to save it into a channel. This is handy for quickly storing
an active frequency when you are searching through an
entire band using direct search. See “Direct Search” on
Page 31.
20-566.fm Page 25 Thursday, August 5, 1999 8:04 AM