Filter
Top Products
32
MOVING A FREQUENCY FROM THE
MONITOR MEMORY TO A CHANNEL
1. Press
MANUAL
, enter the channel number where
you want to store the frequency, then press
PGM
.
PGM
, the frequency number or
000.0000
,
and the
selected channel number appear.
2. Press
MON
.
MON
and the frequency appear and the
channel number flashes.
3. Press
E
.
MON
disappears, the channel number stops
flashing, and the scanner stores the frequency in the
selected channel.
MONITORING A STORED CHANNEL
You can continuously monitor a specific channel without
scanning. This is useful if you hear an emergency broad-
cast on a channel and do not want to miss any details —
even though there might be periods of silence — or if you
simply want to monitor that channel.
Follow these steps to manually select a channel.
1. Press
MANUAL
.
2. Enter the channel number.
3. Press
MANUAL
again.
20-566.fm Page 32 Thursday, August 5, 1999 8:04 AM